D-MAX DCC-601DV Manual de Instruções descarregar pdf (Página 22)

● SYNC : In areas where the supply is at 60Hz, you can synchronize

the output phase of multiple cameras using the power synchronization

function (Line-Lock) without using a synchronization signal generator.

- INT : Internal Synchronization Type

- L/L : Power Synchronization Type, Line-lock

• Press the SET button.

• You can select a desired phase between 0 and 359.

☞Note

• When using AC power at 60Hz frequency, you can use the L/L type synchronization.

• When the power is DC 12V, the SYNC. menu is fixed to the ‘INT’ mode.

● MOTION DET:

If you connect an alarm device to this camera, you can monitor activity more efficiently, because

a signal is generated by the camera whenever motion is detected. The motion detection signal

is output through the MD OUT port.

① When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow indicates

MOTION DET .

② Set up the mode using the 4 direction buttons.

- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, motion detection

sensitivity is increased to recognize even small movement.

- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Sem comentários

D-MAX DCC-601DV Manual de Instruções Página 22