D-MAX DCC-601DV Manual de Instruções descarregar pdf (Página 23)

- SEL POS : Determines which of the 4 vertices of each MD area is to be used.

- YPOS : Determines the coordinate of the vertical axis for SEL POS.

- XPOS : Determines the coordinate of the horizontal axis for SEL POS.

- FILL→SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is sequentially

selected as brown, orange, blue, cyan, yellowish green, yellow and red.

- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.

☞ Note

• MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the monitor screen.

● PRIVACY : Hide an area you want to hide

on the screen.

① When the SPECIAL menu screen is

displayed, press the Up and Down buttons

so that the arrow indicates ‘PRIVACY’.

① Set up the mode using the 4 direction buttons.

- AREA SEL : You can select up to 8 MD areas.

- AREA MODE :

Determines whether to use the area selected

in the AREA SEL, and the size and position of

the area.

- MASK COLOR : Determine area color. You can select Gray,

Green, Red, Blue, Black, White.

- TRANSP : Determine the transparency of selected area as

controlling number from 0 to 3.

- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.

● DIS (Digital Image Stabilizer) :

This function mitigates any picture movement due to external factors such as wind.

● COMM ADJ (Communication Adjustment) :

This function sets up the camera communication status when

controlling the camera through an external control device.

① When the SPECIAL menu screen is displayed, press the Up

and Down buttons so that the arrow indicates ‘COMM ADJ’.

② Set up the mode using the 4 direction buttons.

- CAM ID : Determines the camera's identification number

(between 0 and 255).

- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.

1 2 ... 18 19 20 21 22 23 24 25 26 27

Sem comentários

D-MAX DCC-601DV Manual de Instruções Página 23